Comentarii la: „Arde barca și face cererea de asigurare”. AR TREBUI SĂ NE?! | PĂSĂRĂ DE MARE SAILING Ep. 11

De: Alexander Wijnhamer

Alexander Wijnhamer — Fri, 28 Oct 2022 19:53:07 +0000

I am sorta looking forward to sailing video's

De: Red sailor

Red sailor — Thu, 27 Oct 2022 16:28:57 +0000

You need to do LOADS off sanding FIRST..

De: Skyforever59

Skyforever59 — Tue, 25 Oct 2022 13:05:25 +0000

Hi. I follow your project recently and i find you have courage and determination. Just a question: is your ship a Camper & Nicholson 39. Because we have one based in the north of France and yours look like ours although the inside is a little different. And we have 2 masts. Enjoy !

De: Shooting with Mitch

Shooting with Mitch — Tue, 25 Oct 2022 12:06:33 +0000

Love your vids! This boat will be awesome when it's done!

De: matthew marsden

matthew marsden — Sun, 23 Oct 2022 15:06:21 +0000

you guys have a big job ahead of you. first you need to research how the keel was constructed on your boat . It looks like it is one that has framed compartments that were originally filled with styrofoam. once you find how it is constructed . if it is a framed keel find the support frame around the wet area. cut the glass veneer off the framed section , be sure you cut inside the framing . it's easy to take more off but hard to put it back. Once the cover layer of glass is off you can see how bad the damage inside the keel is . If your lucky the framing will be solid. let everything dry out really well and reinforce everything with glass. use chop cloth, it holds a lot of resin which is what you want, 1 layer chop and at least 1 layer of weave. once everything is reinforced and dry use closed celled styrofoam to fill the void. you need a nice fit to the frame. hopefully you could get the outer layer off in one piece. repair the outer layer , on the inside of the glass (sheet). again use chop and epoxy. bevel the edges of the outside layer of the framed section and the out side sheet you are attaching so you have a large angle on each side and fill with glass and epoxy to make a smooth outer surface. you need to check the rest of the keel for water. I have been involved in repairing 2 boats that had this type of keel problem and there were always more than 1 compartment of the keel flooded

De: Wim

Wim — Fri, 21 Oct 2022 06:16:04 +0000

Might be to late , but never ever use silicone sealant . It will not adhere for a longtime . Instead use neopreen foam band .

De: belledetector

belledetector — Thu, 20 Oct 2022 19:17:34 +0000

That stove would have polished up just fine. Two new burners and new gas hoses and you would have saved yourself a big ticket item. New ones are 2k-5k.

De: Randomescu Aleatoriu

Randomescu Aleatoriu — Wed, 19 Oct 2022 21:56:57 +0000

BigUp!

De: Johnn Lausten

Johnn Lausten — Wed, 19 Oct 2022 21:18:40 +0000

ALWAYS use protective equipment when working with epoxy, trust me I have an epoxy allergy.

De: bluey2035

bluey2035 — Tue, 18 Oct 2022 22:39:07 +0000

Be careful with fibreglass eyes are important fumes are toxic