Comentarii la: ESTE LUCRAREA ACEASTA BARCA APROAPE TERMINATA??? | Refit bricolaj barca cu pânze… Ep 305

De: Martie Powell

Martie Powell — Mon, 06 Mar 2023 19:36:17 +0000

Y’all are doing amazing work! Independence aka Nanji 2.0 is looking fabulous!

De: Caroline

Caroline — Mon, 06 Mar 2023 19:31:41 +0000

De: Andy AVM

Andy AVM — Mon, 06 Mar 2023 12:36:41 +0000

Great Job! Been a fan since Raja Ampat! What do u guys think of Catamarans?

De: André Bauer

André Bauer — Mon, 06 Mar 2023 06:53:08 +0000

For ventilation purposes the back side should not be entirely closed. At least some little holes are necessary. And the compartments behind should be connected so air can flow out fore or aft. I do restore wooden boats and there are lots of completely destroyed boats because of closing compartments.

De: Ben Daves

Ben Daves — Mon, 06 Mar 2023 04:06:18 +0000

I've seen some people who took their cupboards down to the hull and then faired it and covered it with epoxy paint. It looked really nice

De: friarfox

friarfox — Sun, 05 Mar 2023 17:30:20 +0000

Bonita the beauty and Josh the sweetheart slugging it out in the boatyard. How can you not love these three? Best sailing channel on youtube bar none. Ah to be 30 years younger, I'd grab a sander and be there with you .

De: banal pedant

banal pedant — Sun, 05 Mar 2023 13:52:19 +0000

I`m just guessing of course but if you use West systems epoxy for all your work you might want to consider a different epoxy. Thinner. West system is a good product but the thing is its used often because it cures at room temps. If you are in a hot environment you could do much better with a product like proset laminating resin. Much stiffer epoxy but the viscosity allows it is seal up your work better also. A big reason for West System being so popular is it`s curing rate at less than Idea temps. aka marine applications often. You guys never have to deal with temps in the 60`s

De: steve Ridge

steve Ridge — Sun, 05 Mar 2023 12:40:35 +0000

Hi guys good job, just one point check the mould killer and make sure it does not have bleach in it as this will feed the mould. It will take away the discouloristion with scrubbing but it will come back. To kill mould properly use a solution of 80% raw vinegar to 20% water or 70% methylated spirits to 30% water, spray on all surfaces and let it dry naturally. I used to work in mould remediation in North Western Australia and this is what we used. A thing to remember about mould is it takes dirt plus moister plus time, by keeping things dry and aired out mould will not grow. Regular applications so said spray will also keep it in check.
Enjoy your boat work and may you have fair winds.

De: Cal Mauric

Cal Mauric — Sun, 05 Mar 2023 11:20:52 +0000

ive found some bad stuff deep within my boat XD they all have it.

De: Nathan M

Nathan M — Sun, 05 Mar 2023 07:08:23 +0000

Boat building in flip flops. Love it. Amazing job. Will be so worthwhile when it’s all done. Great teamwork. You deserve all your success on here.