Comentarii la: Prima dintre cele 150 de scânduri de bandă | Barcă cu pânze DIY 50 ft – Ep. 344 RAN Sailing

De: jas757

jas757 — Fri, 05 May 2023 11:08:15 +0000

I think that overlapping joints by 4 inches would provide the best overall strength.

De: David McVicar

David McVicar — Fri, 05 May 2023 07:01:46 +0000

Oh, I am so sorry for your loss. God bless

De: M R

M R — Tue, 02 May 2023 01:27:12 +0000

You probably don’t even need stainless screws. The core will be dry. In traditional wooden boats where screws were constantly exposed to salt water the galvanized screws worked for about 20 years before the hull needed to be refastened. In composite hull they would probably last forever.

De: M R

M R — Tue, 02 May 2023 01:11:46 +0000

Since you’re glassing hull from both sides your strip planking is a core and you need only enough strength to bend plank on the jig without breaking. Without glass it would be a different story.

De: 1sheinz

1sheinz — Mon, 01 May 2023 23:31:27 +0000

Rather than screws Why don't you clamp a short 2X4 to the bulkhead and use a wedge to hold the strips together. . Just remove the wedge to add another strip and re apply the wedge. Move the clamped 2X4 up the bulk head ever 3-4 strips and no screws to worry about and NO WOOD SPLITTING which will affect the trueness of the hull. You can do 20-30 strips a day with Marlin mixing epoxy and you laying the strip down and adding the wedges. Deffinatlly lay all the scarf joints up first as it will go much faster than doing each one as you apply the strip. I AM SO SORRY to hear about your Father. My condolences too you both. CHEERS TOO YOU ALL Steve h.

De: Вячеслав Курсин

Вячеслав Курсин — Mon, 01 May 2023 18:08:34 +0000

The length of the joint should be 6-10 thicknesses of the board. This is a standard norm. 60 degrees are not enough. But perhaps the thickness of the fiberglass compensates for the lack of strength of the connection.

De: Mal Graham

Mal Graham — Mon, 01 May 2023 04:42:02 +0000

Oooh was behind with watching So sorry for your loss Johan and family
RIP Bernt

De: Keith henderson

Keith henderson — Sun, 30 Apr 2023 22:07:05 +0000

Sending our thoughts and prayers at this sad time

De: Michael A

Michael A — Sun, 30 Apr 2023 19:32:18 +0000

My Sincere condolences to Johan and family

De: martin bowers

martin bowers — Sun, 30 Apr 2023 04:40:11 +0000

first sorry to hear about you father, you are waiting for stick to break, it will be very soon and when it does it startles you, me working for my father as a boy, cutting very tight corners with band saw, all day, and you here tick tick tick you know is going to break very soon, you are waiting for it then bang and it scares you ha ha