Comentarii la: Cum să ARUNCI 5K $ | Dezastrul nostru de instalație de apă (Actualizare)| Sailing Joco EP106

De: Rimas Meleshyus

Rimas Meleshyus — Tue, 30 May 2023 16:01:02 +0000

Watermaker way ,way too expensive. Not really needed my opinion.

De: Rauf Bolden

Rauf Bolden — Fri, 05 May 2023 09:37:50 +0000

We had watermaker problems cruising the Bahamas, carrying water cans on deck as a backup, because you cannot run out of water on passage across the Atlantic.

De: Dan Knox

Dan Knox — Fri, 05 May 2023 04:50:22 +0000

Ouch! Sorry.

De: Gary Seven

Gary Seven — Thu, 04 May 2023 16:48:46 +0000

So sorry for the trouble trying to get a watermaker in….,how frustrating and expensive. Good job with the seaflow pump-I used one of those in my RV I restored. Keep at it!

De: Allyn Onderdonk

Allyn Onderdonk — Thu, 04 May 2023 13:59:01 +0000

Um watermakers are something I've invested a lot of time into making, fixing, and researching. I do see a couple of potential problems with the system. First off if it is a dc system the amperage draw worries me a little. 40 amps is probably a very low hp motor maybe 1/2hp or 1/3hp depending on motor quality. I do see also that you've gotten one of the stubby housings for the membrane. The typical single membrane unit is on a 1/2hp motor and the typical one I see draws like 40ish to 60 amps. There are more efficient motors but that is what I usually see as a range. The pump head will typically have a flow rate of 1.2 GPM | 1500 PSI | 1750 RPM. What model pump head do you have and model motor? The AR pump heads are typically a fairly good quality. Its the motor that worries me. The boost pump you bought is a good model, I have one in my RV Overlander and two in my boat. So far no problems at all. Also typically with 1/2hp installs the membrane is a 25×40 model. Honestly I've never seen such a small membrane on this style of watermaker(One with a pressure washer head). What company sold it to you?? It may be that the pump motor wiring is undersized for 40 amps. Not looking at a wiring gauge chart it needs to be fed by 8 gauge wire at least I'd think with a silicon insulation. What I have is a dual 25×40 membrane, Comet Pump – LWS 1809, 1hp DC 1750rpm, 56c flange mount motor that draws 80 amps, and some assorted bits. The same boost pump. Depending on what is happening it could be your needle valve or membrane has a problem. Answer my questions and maybe I can help you if it hasn't been resolved.

De: Terry Tonkin

Terry Tonkin — Thu, 04 May 2023 13:33:51 +0000

There is little point in offering advice etc as it appears the videos are running some 5 months behind

De: Spartan Buff

Spartan Buff — Thu, 04 May 2023 13:10:18 +0000

I'm sorry, it sounded like you said meow.

De: jo nunya

jo nunya — Thu, 04 May 2023 12:46:38 +0000

sorry that happened to you. the two of you deserve some good luck!

De: The Ocean Bandits

The Ocean Bandits — Thu, 04 May 2023 12:32:53 +0000

Such a major bummer! Tag the name of the water maker company and put them on blast as much as possible! It’s ridiculous that they won’t help you with product that they shipped BROKEN! Fires me up! Hoping this will come together soon for you guys

De: Scott Goode

Scott Goode — Thu, 04 May 2023 11:47:19 +0000

Oh wow, your videos are really long ago!! New Year’s Eve, happy new year. Where are you now????? Hope you are both well?

Comentarii la: Cum să ARUNCI 5K $ | Dezastrul nostru de instalație de apă (*Actualizare*)| Sailing Joco EP106