Comentarii la: Kit E36: Progres și șlefuire forebeam!

De: Manny Valenti

Manny Valenti — Sun, 04 Jun 2023 05:15:27 +0000

Finally someone with a decent microphone

De: Daniel Mashonkin

Daniel Mashonkin — Sun, 04 Jun 2023 03:33:32 +0000

Hello! Just curious on what sort of resin used by Shioning to laminate those green foam sheets? I also feeling weird every time you use grinder. From my experience it is too powerfull. Any small mistake could ruin a lot. Not perfect surface left after compare to eg. belt sander. But I like your new sanding equipment! Good for smooth finishing. I am personally using 6" orbital with purple 3M disks and it works great! Sanding media is the key. Now I am start worrying on what's happen if you lay glass on non perfectly curved and sanded surface. It might catch some air which you definitely don't want under the waterline.

De: Chris Watkins

Chris Watkins — Sun, 04 Jun 2023 03:26:35 +0000

The kerfs will work. I have built some major deck projects and other carpentry that required cutting kerfs and it worked well. Your progress is great and I enjoy watching your boat come together.

De: Mike Walker

Mike Walker — Sun, 04 Jun 2023 02:38:31 +0000

Hey Philip - at 11:46 you mention "reducing thickness by 10 % " - is that the DuFlex foam hull thickness you are referring to and if so, what thickness panel have you spec'd for the hulls if I can ask? (Or did you mean reducing the 'x' many layers of basalt overlay by 10% as compared to e-glass? )
Thank you again for the time taken to diligently show your progress ...and problems.

De: brian tasse

brian tasse — Sun, 04 Jun 2023 00:41:02 +0000

Someone tell the old bald guy to put the hood up on his "bunny suit"; works better that way.

De: R. E. Hill

R. E. Hill — Sat, 03 Jun 2023 23:04:50 +0000

Nice one... any stage during this build were vacuum bagging will be used..? Anyways, looking forward to your next video..

De: Edward Haigh

Edward Haigh — Sat, 03 Jun 2023 21:00:27 +0000

Looking good guys, if i could make a sugesstion with the bow, cut planks off at frame 0 and build a sacrificial bow out of foam all shionning cats used to be done like this im suprized the Schionning team has not sugested this option.

De: Frederick Reinking

Frederick Reinking — Sat, 03 Jun 2023 20:13:45 +0000

I wonder if it would be possible to make a flat fiberglass board and the cut the stripes out of it to use instead of wood for the forebeam ?

De: Jeremy Duncan

Jeremy Duncan — Sat, 03 Jun 2023 20:06:20 +0000

You’re going to cut the time due to reducing the learning curve too. Looks like you’re building a boat! stay safe!

De: James Powell

James Powell — Sat, 03 Jun 2023 19:51:14 +0000

One thing I learned decades ago, when working with epoxy and cabosil is to sand while still green the bulk of sanding that needs to be done. It sands much easier before it gets rock hard with full cure of a week. Here's that basalt vs bullet video you mentioned https://www.youtube.com/watch?v=FE7c20jjxrE

Comentarii la: Kit E36: ​​Progres și șlefuire forebeam!