Comentarii la: Lucrări esențiale la cârma din lemn a bărcii noastre cu pânze — 158 de săptămâni după restaurarea lui Sailing Yabá

De: Alan Glen

Alan Glen — Sun, 05 Nov 2023 17:35:00 +0000

I think you need a positive stop in the helm. If the boat rolls and you lean on the wheel you may force the rudder too far. Install a block after 2 turns to left or right of straight ahead.

De: Sergio Video Clips

Sergio Video Clips — Sun, 05 Nov 2023 17:34:26 +0000

Gran bel lavoro...

De: chuck smith

chuck smith — Sun, 05 Nov 2023 17:34:18 +0000

The pulleys at the bottom of the loop need to be fastened far more securely. In heavy sea they will not hold up to push on the rudder!!!!!!!

De: Gary DeWitt

Gary DeWitt — Sun, 05 Nov 2023 17:31:35 +0000

That "nipple" is a zerk fitting. There are grease guns designed to mate to the fitting and fill parts with grease. Search online or your local automotive store, you're going to need one.

De: MarkGuiver

MarkGuiver — Sun, 05 Nov 2023 17:30:22 +0000

You need to put a sliding window in the cab to get some air in there.

De: Eddie

Eddie — Sun, 05 Nov 2023 17:28:48 +0000

I'm not a marine engineer, but if I were you I would get an engineer to check that steering setup. The last thing you want is for that fail at sea, It does look a nice job though

De: BigAl Mon' Amiee

BigAl Mon' Amiee — Sun, 05 Nov 2023 17:28:24 +0000

Now you have power steering, but on dry land. Once in the water and moving things might be a little more resistant, but looks good and meets your needs. Glad to see the boat is nearing the launch stage

De: Douglas Miller

Douglas Miller — Sun, 05 Nov 2023 17:27:55 +0000

Thanks!

De: Garden Railroading Join The Fun

Garden Railroading Join The Fun — Sun, 05 Nov 2023 17:27:15 +0000

Love your improvements. My only suggestion is to add a "tensioning device" to keep the wires taught. It can be as simple as a pully riding on the long run of the wires attached to a spring so that when the wire stretches you do not have to keep tightening them.

De: Jesse Blair

Jesse Blair — Sun, 05 Nov 2023 17:23:27 +0000

Hey All, just an fyi don't remove that nipple when filling grease, see that little silver tip on the nipple, its meant for a grease gun, " don't take off the nipple to fill the grease it needs the pressure" keep up the great work guys!!!!!