Comentarii la: OUT with MOLD in with NEW (Fresh Interior!)

De: Frits

Frits — Wed, 15 Nov 2023 16:16:35 +0000

De: 2014NTF6

2014NTF6 — Wed, 15 Nov 2023 07:15:36 +0000

That glued on vinyl looks like shit, rip it off and do something different! As a fellow Aussie you’re making us look bad And…read the instructions on the glue tin. I bet it say to let the glue tack off!

De: Tim's bits n pieces

Tim's bits n pieces — Wed, 15 Nov 2023 01:52:32 +0000

Now, you will both need a change of clothes and wash your dirty hands before touching or sitting on that White couch… hmm not a good colour at all… I guarantee there will be marks on it within the first week…… for the wall coverings you need to use contact cement and put it on both surfaces let it sit until it gets tacky and then apply the covering to the walls, if not done like this then it will bubble and also come off in a matter of weeks…. you also need some sort of roller or I used to use a piece of wood about 300 long with rounded edges and used it for smoothing out things.. start at the centre and work outwards, Yes the fabric will stretch when fastening. When trimming the fabric after it has stuck use a straight edge (a metal ruler or similar) and cut along that and it will look much cleaner and neater.. Aussie Aussie Aussie……..

De: Jean-Claude Marin

Jean-Claude Marin — Tue, 14 Nov 2023 20:18:27 +0000

A tip when cutting the extra vinyl in the corner, lay a metal ruler or a wide putty knife on the part you keep and use a sharp blade to follow the edge of the metal.

De: Robert Zalnis

Robert Zalnis — Tue, 14 Nov 2023 15:18:28 +0000

I use a flexible 8" drywall putty knife to trim the edges. use the blade of the putty knife to tuck the vinyl tight in the corner and use a snap knife or utility knife to cut along the edge of the putty knife. makes a perfect strait cut. just move along the corner in 4" segments to do long cuts.

De: Susan Woodrum

Susan Woodrum — Tue, 14 Nov 2023 15:16:29 +0000

A great knowledge source for all things fabric on a boat is the Sailrite videos on their website. For instance their video: Installing Vinyl Fabric As a Boat Headliner

De: Phil Kakid56

Phil Kakid56 — Tue, 14 Nov 2023 15:09:40 +0000

As to the wrinkles in the settee back, the guy who made the cushion set should be able to use a steamer to get the wrinkles out. A couple other comments regarding the installation of vinyl on the sides and overhead. First, next time you need to replace it (and you will) the manufacturer should have a foam-backed version of what you are using. Second, as commented elsewhere, you MUST apply the contact cement to both surfaces and allow it to touch dry before installing it. And I definitely would not use vinyl anywhere near a cooking surface. I urge you to take a look at some of the Sail Life videos because Mads has seen and done it all. He does great DIY instruction as he takes on various projects.

De: Paul Downey

Paul Downey — Tue, 14 Nov 2023 14:21:06 +0000

It's all starting to come together; you guys are Making it happen! Great job!

De: S T

S T — Tue, 14 Nov 2023 13:48:20 +0000

A beautiful boat. A fantastic project. Like all big jobs this is physically difficult. But I believe it's by far more difficult mentally. You are doing so well. Inspirational!!!

De: Greatwhite

Greatwhite — Tue, 14 Nov 2023 12:22:10 +0000

AS Garryundy1777 said. you need to coat both sides, wait for it to be tounch dry and then stick it down. As an aussie would say. (It should stick like shit on a blanket)