Catamaranul nostru cu pânze se leagănă sălbatic pe Ancoră! ASTA A REPARAT! [Sailing Family]

Catamaranul nostru cu pânze se leagănă sălbatic pe Ancoră!  ASTA A REPARAT!   [Sailing Family]



Ne-am legăna cercuri în jurul ancorei noastre pe catamaranul nostru cu pânze! Chiar și cu multe lanțuri scoase, a fost foarte incomod și probabil a contribuit la pagubele pe care le-am suferit în timpul acelei furtuni groaznice. În acest videoclip instalăm un nou căpăstru MANTUS care este considerabil mai lung decât vechiul căpăstru! Acum au trecut câteva săptămâni în mai multe ancoraje și situații meteo/actuale și credem că acest căpăstru ne-a rezolvat problemele! Link afiliat Mantus Marine: https://www.mantusmarine.com/?affiliates=145 Conectează-te cu noi și ajută-ne să facem în continuare aceste videoclipuri pe Patreon! https://www.patreon.com/saltyescape Dacă vedeți ceva care vă place în videoclipurile noastre, sunt șanse ca acesta să fie inclus în Magazinul nostru afiliat Amazon: https://www.amazon.com/shop/saltyescape Ne place să ne auzim de la tine ! Vă rugăm să ne lăsați un comentariu frumos și să apreciați videoclipul dacă vă place ceea ce facem! Mulțumesc pentru vizionare și distribuire! Vizitați site-ul nostru la: www.Salty-Escape.com Apreciați pagina noastră de pe Facebook: https://www.facebook.com/SaltyEscape/ Instagram: https://www.instagram.com/_saltyescape_/ Toate echipamentele noastre pentru camerele YouTube AICI : https://www.amazon.com/shop/saltyescape?listId=344SXIH9G37SK Folosim Artlist pentru toată muzica noastră! Poți și tu și iată link-ul! https://artlist.io/Corey-456129 #saltyescape #catamaran #sailing

source

6 thoughts on “Catamaranul nostru cu pânze se leagănă sălbatic pe Ancoră! ASTA A REPARAT! [Sailing Family]

  1. I would ditch the carabiners connecting straight to the bow and go dyneema if you have some. Use 2mm dyneema, with as many wraps as you can fit into the hole (individually tied) to create a large loop. If one strand fails, you won't have a full failure.

    But the bigger reason for dyneema over metal (really the only reason) is NOISE. In certain conditions you hear that rattling all night and it's real annoying! Calm or shifting anchorages believe it or not can be noisy with metal rattling against metal.

    Enjoy the bahamas!

  2. I seriously ordered a new Mantus M1 anchor, swivel and two bridles for anchoring and mooring on Monday for our trawler. I'm glad to hear your strong endorsement of their products.

  3. Guys been watching you a while, good video. Mantis gear is pretty good. You really need to think about those carabinas and change them out ASAP. 8000 Lbs is only 3.6 metric tonnes which is not a lot! Preferably change to a lockable stainless steel shackle through that plate. Fit with the eye facing the centre of the boat and wire. A single 12mm (1/2 inch) shackle is rated at 7 metric tonnes Or 15432 Lbs. The carabinas are susceptible to snatch loads imposed by the bridal and will not take side loads or twisting that a shackle will. Do not use line between the plate and existing Mantis shackle. Again the shock loads and twisting as well as any point load from the plate will damage the line quickly. The general rule is metal to metal, line to line. unless there is an eye or thimble to spread the load and avoid point loading the line. hope this helps. Sail Safe Guys, Ant & Cid.

  4. I would just be concerned about a side-load or torsion force being applied to those carabiners, which they are not designed to handle (anchor lines do interesting things). They make me a little apprehensive. Nice video, guys!

  5. SV Maris Stella is excited to try your idea. Hope it works on a monohull! This swinging is crazy making😂 Looking forward to seeing you again! Happy ⛵️

Lasă un răspuns

Adresa ta de email nu va fi publicată. Câmpurile obligatorii sunt marcate cu *

Follow by Email
YouTube
YouTube
WhatsApp