Se pare că toată lumea are o barcă albă… așa că am decis să facem o schimbare cu a noastră. Ne pare atât de rău pentru luna de tăcere – nu au fost multe de actualizat din partea noastră, cu excepția faptului că cortul încă nu a fost reparat și au existat doar câteva spații în interiorul ambarcațiunii unde putem lucra. Ne-am concentrat asupra încercării de a termina carenarea și amorsarea în ambele dane, precum și în capul principal. Acum am ajuns la unele dintre acele zone suficient de departe încât sunt gata pentru amorsa de finisare!! Aceasta va fi ultima rundă de amorsare înainte ca acestea să fie gata pentru vopsea. Pentru a ne ajuta cu acest pas, am apelat la noii noștri parteneri de la Alexseal. Ei fac niște produse de foarte înaltă calitate, iar în această etapă am reușit să folosim umplutura fină (compusul de carenare pentru detalii) și acum grundul de finisare. Care este incredibil de subțire și va trebui să ne acordăm puțină libertate pe măsură ce învățăm cum să lucrăm cu el. Pereții din dana și capul nostru de master au fost acum vopsiți în alb cu acest grund și arată uimitor!! Este incredibil să vă simțiți mai bine cum vor arăta aceste spații odată ce sunt finalizate. Și în alte știri interesante, vom lucra și cu Alexseal pentru a picta carena bărcii noastre!! Acest lucru nu se va întâmpla până în primăvara viitoare, așa că avem suficient timp pentru a decide culoarea. Deși, după câțiva ani în urmă, după ce am văzut o anumită Gunboat în St. Barths, întotdeauna am crezut că roșu ars ar fi o culoare rece. 😉 Care ar fi sugestiile tale pentru culoarea carenei noastre? Speram sa va placa!!
source
Am visat să pictez barca noastră în acest roșu strălucitor!! (MJ Sailing – Ep 321)
30 thoughts on “Am visat să pictez barca noastră în acest roșu strălucitor!! (MJ Sailing – Ep 321)”
Comments are closed.
I would like to see how you fix the runs on the wall. If possible, add it to an upcoming video. Thanks.
Welcome back guys, I was a little concerned about your absence because this is the only format I follow you on and I thought I may have stopped my subscription, but I hadn't and all is well !! I love the idea of a colourful boat, La Vag have an orange one, Atticus have a green one, The Wynns have a pale Blue/Green one so maybe a Red hull for you guys. Make it stand out, make it bright and make it different to match it's owners! Thank goodness ye are OK and back on our screens. Stay Safe & Fair Winds!! ☘
I want one with emerald green hull and golden top side and sails
So glad to see you guys back! I was worried the storm took you out of commission.
The yellow pour spout goes on the inside rim, then it drains back into the can! If you put it on the outside rim, it drains into the groove, and then you have a mess.
Well that was long to see the progress. I can image you are done with the fairing part.. It takes so long..
Re: Color. My vote is for "international (day glo) orange. 😛
Hubby was an auto body & heavy truck painter before retirement. When we bought our RV, I wanted a red or the blue one, but he told me it would fade unbelievably. We ended up with the off white one and I was SO thankful after reading so many people complaining about their RV fading and being so much work required to keep up with it. I would recommend that you go with a lighter color.
I looked into those Alexseal colours, in my opinion I would chose the following, 5195 – Santorin Blue – for below the waterline, the 1158 – Moon Dust – for above the waterline, 3158 – Toredor Red – For lettering and accents and finally, the 9132 – Cloud White – for graphics and designs like in your episode 22. I looked for pearl-ish finish colours, but Alexseal doesn't do that it seems.
Sorry to hear about the tent damage…in spite of the setback, you’re still progressing—looks great!
You guys ever going to release episode 319? (looks like a video about the storm that broke the tent) or is that going to remain a patreon only video?
"Please tell us what you think would look good on our boat". You, Jessica; You would look good on your boat, lying on the trampoline in a bikini that matches the paint on the hull-sides (so gel coat's fine by me).
Excellent spray pattern. Nice job Matt!
would be helpful to know if you have picked a color for the sails
A first "ghost coat" Is a good idea. Just let it flash off then you will not have so many runs as you lay the next coat down.
White is the only color that doesn't absorb heat from the Sun. Maybe a stripe or a manufacturer logo or some custom graphics!
Easy beautiful red ….. TORCH RED it’s a corvette colour and really suits angles and would look amazing on yours ❤️🇨🇦
Corvette Torch red is not a metallic but lots of depth and because of no metallic much easier to repair
Spraying anything open the gun up to full settings to start. Im sitting yelling the screen…. open the fan you should be spraying a a 6 to 8 inch fan with that gun overlapping each run… also a first coat should just be a mist coat… don't try to cover with first coat. Let that offgas then apply 2nd coat. Go for third coat if you plan on sanding before finish coat.
Matt is not allowed to spray the hull until he learns to use a spray gun. Lol. There are a ton of videos out there… one guy is not far from you… I'll send you his name if I can remember it.
What about a white with red stripe??
Great progress! I like the idea of red – this will definitely stand out wherever you go. TIP: the yellow paint pouring guard is designed to be installed on the INSIDE lip of the paint can, not the outside. 🙂
You might want to consider what the color is going to do inside the cabins as far as radiant heat from the sun is concerned .the darker the color the warmer the inside could become . A nice lighter color will reflect the suns rays a little better thus keeping the inside cooler and your air conditioning won’t work as hard ,, allegedly . You probably already knew this I hope .
Cherry Red
Satin red chrome
0:01: ⛵ Challenges with repairing boat after storm, delaying video uploads and working on fairing and priming.
3:31: 🎨 Exploring vibrant color options for boat exterior painting decisions.
8:30: ⚓ Boat preparation progress update for finer primers and finishing touches.
11:58: 🎨 Preparing and applying a new coat of paint on the boat using a sprayer and protective gear.
19:31: 🎨 Exciting progress on boat painting with smooth finish and attention to detail.
Timestamps by Tammy AI
Welcome back. I’ve missed you and was worried about your silence. We’ve just had our boat painted (navy blue) and it’s fantastic. Paint your boat whatever colour you want but not pink!
Red does fade fast, almost any colour would be better than white. Two pack polyurethane is a much better looking finish than gel coat and easier to keep clean. Keep up the good work but don’t get to pedantic.
I like that metallic champagne I even like that green but you should pick what’s your favorite colors tell us what’s your favorite color
One way to reduce runs and splatters when spray painting is to keep your finger on the trigger and/or start pressing the trigger when you are off the part being sprayed. I'd say red would be awesome, but would it make you more of a target for thieves, etc.?
Sun burst orange for the color