Am îndepărtat TOATA VOPSEA pentru a salva carena de aluminiu a iahtului nostru de 78 de picioare

33 thoughts on “Am îndepărtat TOATA VOPSEA pentru a salva carena de aluminiu a iahtului nostru de 78 de picioare”

1. I'm thoroughly enjoying this series. Curious though, was there a reason that you held these videos for 3 years before releasing them?

2. For a same sort off job and hull I went to a big offshore company and let them do the job for €5000,- (while they where working, we became friends) and afterwards included painting! 🙂🎉🎊

3. OK, so I have now seen 3 videos from this series and I seem to be going back and forward in time. That said, every video so far is extremely interesting and I am in awe as to the work you are carrying out – do you know when this vessel will be completed or is it like my boat, an ongoing restoration job.

4. if it ain't fiberglass it ain't mine 😂

5. One day i would love to do sort of what you two are doing. Find an older trawler (we will be also on a tight budget), shine her up and make her seaworthy. I'm beginning to question that this may be more than we can handle. You two work great together. I'd be curious to know if you would have proceeded with this project knowing what you know now.

6. After all that, I think I would have tig welded the deeper pitts and ground them down flush, just so there were no thin spots in that quarter inch plate. Wouldn't have cost much more nor taken much time compared to what you spent already. She is a really nice boat though.

7. I truly hope it wasn’t salt water blasted?

8. I wonder how much weight you saved by removing all the fairing compound.

9. Bondo is a name brand and what you have is body filler

10. They make a wire wheel with diamond chips on it for the alluminum it's a game changer!!!!

11. The boats name was Dogfart? Really?

12. They bought a hole in the water that they tried to stop up with money.

13. If the hull is 1/4” thick now what was it new?

14. this was just excellent … I love the raw aluminum look and am very curious how it ends up looking on this style of boat … the few shots at the end with the nice stripe looked great

15. This is what happens when you buy somebody else’s junk.

16. Like a rotten old tooth! Grind it, dig it all out, clean it all out, strip it bare.

17. Is it 5086 or 5052 or 6061 hull plate ?

18. I hope you wore mask while sanding and blasting with all that aluminum dust and sand ?? Bad for the lungs

19. Tangaroa is a Maori name does the boat have any connection to New Zealand

20. Take the boat to Turkey and have the repairs carried out.

21. My father purchased a wooden boat. It was rotten. Started to repair it, but he ended up feeding it into the wood burner.

22. Tangaroa : Canadian for Money Pit!

23. You need a elastomeric coating under the paint system. AMS-S-8802 that will give the hull better protection then just the paint system.

24. interprotect 2000e works well on aluminum.

25. 🌟 Guys, you were broadcasted via #messtv onboard a 116-foot super yacht off the coast of St Baths in the Caribbean

    Crew Feedback. just watch your product values and the final finish of each broadcast. When watching It feels very 2005ish, and the graphics are well dated. The narration is pretty good. If your target audience are kids or carehome residents. Finally, there's a lot of repetition. There's a lot to be said for the sound of silence.

    🌟 FUN-FACT, we are looking forward to the next episode 😮😊

26. Back in the early 90s we were able to tour the Palmer Johnson boatworks in Sturgeon Bay Wisconsin. They were at the finishing stages of a large motoryacht for a unnamed party. They were fairing the hull with buckets of "fairing compound". Bondo! For us, that was not something we had thought of when looking at a beautifully finished hull.

27. Geez Louise your props are admidships! Hows she handle? Take that stern section out and youll be back down to 50' 😂. Maybe next time you have to paint itll cut your shipyard time in half 😊

28. Bondo uses talcum for a filler and it absorbs water that freezes and cracks and swells. Get the filler without talcum and uses fiberglass instead for a more permanent fix.

29. If you think wet blsating sucks, then you should really try regular dry sand blasting. It's 3 times worse than wet, and yes, I have done both many times.

30. As an old aluminium boat builder you need to use an etch primer first as it adheres to the aluminium and then you need a 2 pack paint over that.

31. wow thats a huge job.we know how nice it is when its quiet we have a neighbor who does his projects illegal without permits including deforestation and has been dumping thousands of trucks of dirt nextdoor for years and the noise is sometimes incredible.he has friends who work at the county to protect his illegal dumping my guess is they share the profits for dumping.seems everyday some dumb tractor is running.your lucky its quiet again.boat looks good

32. It’s called fairing not bondo. And if they did use bondo that’s what caused the problem. Just saying.😊

33. I bet the engines on the boat run smoother without having to push all that weight.You get rid of that bondo.I'm sure the fuel economy has been improved

Comments are closed.